Vertical Machining Center

  •  
  • Introducing AWEA with over 30 years manufacturing abilities and advanced technology skills, the vertical machining centers are based on high rigidity structure and three axes high precision linear guide way design.
  • Based on innovative technology, AWEA is specialized on high precision parts and mold machining industry. It can fully present high precision and high efficiency machining ability.
  • With fast arm type ATC and chip conveying system, it is to provide you with fast, strong, stable machining performance.
  • AWEA vertical machining centers are broadly used in high precision machine parts manufacturers, which can easily meet your demands of today and tomorrow.
  • All AWEA vertical machining centers are adopted one-piece ball screw driving motor support and bearing support to enable cutting force to spread evenly into casting body, so it efficiently enhances axial system of entire rigidity and prevents deformation of ball screw.
C型机

Introduction of Model

NV series 650 / 850

High Performance Vertical Machining Center

  • X-axis travel : 650 / 850 mm
  • Y-axis travel : 510 / 550 mm
  • Z-axis travel : 510 / 635 mm
  • Table size ( X direction ) : 750 / 1,000 mm
  • Table size ( Y direction ) : 510 / 550 mm
  • Table load capacity : 500 / 700 kg
  • Spindle speed : Direct drive 8,000 rpm
  • Spindle motor ( cont. / 15 min ) :
    7.5 / 11 ~ 11 / 15 kW
  • Spindle taper : BBT40
  • X / Y / Z rapid feed rate : 36 / 36 / 24 m/min.
  • Tool magazine : 24 T
Standard Accessories
  • AICC contouring control /
    Machining condition select
  • Spindle air curtain
  • Coolant nozzle around spindle
  • Gravity axis anti-drop function
  • Centralized auto. lubricating system
  • Roof enclosed splash guard
  • Coolant system with pump and tank
  • Chain type chip conveyor ( NV-850 )
  • Chips wash down
  • Heat exchanger for electrical cabinet
  • Rigid tapping
  • Automatic power-off system
  • Alarm light
  • Air gun / Water gun
  • Foundation bolt kit
  • Transformer
  • Tool box

AF series 650 / 1000 / 1250

High Performance Vertical Machining Center

  • X-axis travel : 610 ~ 1,250 mm
  • Y-axis travel : 510 ~ 620 mm
  • Z-axis travel : 510 ~ 620 mm
  • Table size ( X direction ) : 750 ~ 1,350 mm
  • Table size ( Y direction ) : 510 ~ 620 mm
  • Table load capacity : 500 ~ 1,000 kg
  • Spindle speed : Direct drive 10,000 rpm
  • Spindle motor ( cont./ 30 min ) :
    7.5 / 11 ~ 11 / 15 kW
  • Spindle taper : BBT40
  • X / Y / Z rapid feed rate :
    36 / 36 / 24 ~ 48 / 48 / 32 m/min.
  • Tool magazine : 24 T
Standard Accessories
  • AICC contouring control /
    Machining condition select
  • Spindle air curtain
  • Spindle cooling system
  • Gravity axis anti-drop function
  • Coolant nozzle around spindle
  • Chips wash down
  • Caterpillar type chip conveyor( AF-1000 / 1250 )
  • Coolant system with pump and tank
  • Centralized auto. lubricating system
  • Transformer
  • Roof enclosed splash guard
  • Alarm light
  • Heat exchanger for electrical cabinet
  • Oil skimmer
  • Automatic power-off system
  • Air gun / Water gun
  • Foundation bolt kit
  • Tool box

NFV series 1000 / 1250 / 1250B

High Performance Vertical Machining Center

  • X-axis travel : 1,020 ~ 1,250 mm
  • Y-axis travel : 550 / 620 mm
  • Z-axis travel : 635 / 620 mm
  • Table size ( X direction ) : 1,200 / 1,350 mm
  • Table size ( Y direction ) : 550 / 620 mm
  • Table load capacity : 700 / 1,000 kg
  • Spindle speed : Direct drive 8,000 ~ 12,000 rpm
  • Spindle motor ( S1 / S2,S3 60% / S3 25% ) :
    11 / 13 / 15 ~ 15 / 18.5 / 20.3 kW
  • Spindle taper : BBT40 / BBT50
  • X / Y / Z rapid feed rate :
    36 / 36 / 48 ~ 48 / 48 / 32 m/min.
  • Tool magazine : 24 T
Standard Accessories
  • AICC2 function / Machining condition select
    ( NFV-1000 / NFV-1250 )
  • Spindle air curtain
  • Spindle cooling system
  • Gravity axis anti-drop function
  • Coolant nozzle around spindle
  • Chips wash down
  • Caterpillar type chip conveyor
  • Coolant system with pump and tank
  • Centralized auto. lubricating system
  • Transformer
  • Roof enclosed splash guard
  • Alarm light
  • Heat exchanger for electrical cabinet
  • Oil skimmer
  • Automatic power-off system
  • Air gun / Water gun
  • Foundation bolt kit
  • Tool box

NDV-1060

High Speed Vertical Machining Center

  • X-axis travel : 1,060 mm
  • Y-axis travel : 600 mm
  • Z-axis travel : 600 mm
  • Table size ( X direction ) : 1,200 mm
  • Table size ( Y direction ) : 600 mm
  • Table load capacity : 700 kg
  • Spindle speed : Direct drive 15,000 rpm
  • Spindle motor ( S1 / S2 / S3 ) : 11 / 13 / 15 kW
  • Spindle taper : HSK-A63
  • X / Y / Z rapid feed rate : 36 / 36 / 24 m/min.
  • Tool magazine : opt. 24 T
Standard Accessories
  • AICC 2 / 400 blocks look ahead /
    Machining condition select /
    Nano smoothy machining
  • Spindle air curtain
  • Coolant nozzle around spindle
  • Spindle cooling system
  • Gravity axis anti-drop function
  • Chips wash down
  • Caterpillar type chip conveyor
  • Coolant system with pump and tank
  • Centralized auto. lubricating system
  • Transformer
  • Roof enclosed splash guard
  • Alarm light
  • Heat exchanger for electrical cabinet
  • Oil skimmer
  • Automatic power-off system
  • Air gun / Water gun
  • Foundation bolt kit
  • Tool box

ML-1365

High Rigidity Vertical Machining Center

  • X-axis travel : 1,300 mm
  • Y-axis travel : 650 mm
  • Z-axis travel : 610 mm
  • Table size ( X direction ) : 1,400 mm
  • Table size ( Y direction ) : 650 mm
  • Table load capacity : 1,000 kg
  • Spindle speed : Gear 6,000 rpm
  • Spindle motor ( 60 min / 30 min / max. ) :
    15 / 18.5 / 20.3 kW
  • Spindle taper : BBT50
  • X / Y / Z rapid feed rate : 36 / 36 / 24 m/min.
  • Tool magazine : 24 T
Standard Accessories
  • Spindle air curtain
  • Coolant nozzle around spindle
  • Spindle cooling system
  • Gravity axis anti-drop function
  • Chips wash down
  • Caterpillar type chip conveyor
  • Coolant system with pump and tank
  • Centralized auto. lubricating system
  • Transformer
  • Roof enclosed splash guard
  • Alarm light
  • Heat exchanger for electrical cabinet
  • Oil skimmer
  • Automatic power-off system
  • Air gun / Water gun
  • Foundation bolt kit
  • Tool box
AWEA MECHANTRONIC CO., LTD.
( HEADQUARTERS )
629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Xinpu, Hsinchu 305, Taiwan
TEL : +886-3-588-5191    FAX : +886-3-588-5194
E-mail : [email protected]
AWEA MECHANTRONIC ( SUZHOU ) LTD.
( WUJIANG BRANCH )
215200 No.4888, East Lake Taihu Ave., Wujiang Economic
TEL : +86-512-8286-8200    FAX : +86-512-8286-8210
E-mail : [email protected]

bridge|video|AWEA 5-axis|youtube|video machine|AWEA|Contact
We use cookies to give you the best experience. By using this site, you accept the use of cookies.   [ Agree ]
香港2019四不像图盈采